Архив рубрики: Сompressor oils

Enekon

Oil «Enekon» is developed from Joint-Stock Company «Enekon-service» together with RSU oil and gas of Gubkin. It is intended for greasing, consolidation and cooling of air screw compressors. On the physical and chemical properties соотвествует to similar mineral oils of leading foreign firms. Oil «Enekon» has successfully passed a four-year-old cycle of tests in the conditions of commercial operation more than at 500 enterprises of Russia, Belarus and Kazakhstan. The minimum term of operation without replacement — 2500 hours.

Kp-8s

TU 38.1011296-90
Turbocompressor and the screw compressors which are pumping over air, nitrogen, ammonia and other gases
Viscosity index, not less 95
Temperature of flash, °C, not more low 200
Temperature of hardening, °C, not above -15

K3-10N

Produced is on the same technology, as oil K3-10. Contains in addition an additive lowering temperature of hardening. Possesses the improved starting properties at low temperatures of air. It is intended for greasing of piston compressors with temperature of forcing to 200°С, and also rotational compressors.

K2-24

Oil K2-24 (TU 38.401-58-43-92) is prodused from mix of Volgograd’s petroleums and low-sulphur West Siberian’s petroleums by method of selective clearing. Contains an additive improving antioxidizing and antiwear properties.
Apply to greasing of multistage piston compressors of a high pressure, including compressors air-separating installations.

Viscosity index, not less: 82
Density at 20°С, kg/m3, no more: 900
Viscosity kinematic, cSt, at 100°С, not less: 21-25
Acid number, mg: 0,35
Flash temperature, in an open crucible, °C, not more low: 270
Hardening temperature, °C, not above: -10
Ash percentage, %, no more: 0,06

Data on operational temperatures represent values which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mehaniko-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can influence work of components.