Structure: Receive from oil ?S-20.
Scope: Apply in devices at temperature not above 160 °C. Pack, mark, transport and store in accordance with GOST 1510-84 in glass bottles capacity to 1 ??3 with the ground in or screwed stopper with an internal lining.
Lubricant oil 132-08 (GOST 18375-73) is intended for greasing of bearings in various devices and sites of a friction of the machines working in the range of temperatures from — (65-70) to +70 °?.
It represents a mix of polyethil liquid and mineral lubricant oils in various parities. It is packed into glass container with the capacity from 0,25 to 1 cubic decimeter (GOST 6-19-72-76), glass large bottles with the capacity of 20 cubic decimeters, and also in cans from a white tin (GOST 6128-81), cans from the white tin, the zinced flasks (GOST 5799-78) and aluminum flanks (GOST 21029-75). The Warranty period of storage of lubricant oils in container of the manufacturer — 2 years from the date of manufacturing. After an oil warranty period analyze on conformity to requirements of standards each time before application.
Kinematic viscosity at 100 °C, cSt: —
Kinematic viscosity at 20 °C, cSt: 47-55
Kinematic viscosity at -50 °C, cSt: 2200
Viscosity index, not less than: —
Flash temperature in an open cup, not lower than, °C: 173
Hardening temperature, not above, °C:-70
Density at 20 °C, kg/cu.m, not more than: 950-970
Acid number, mg, not more than: 0.15
Alkaline number, mg, not less than: —
The maintenance of silicon, %: 21.0-24.0
Data on operational temperatures represent values, which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mechanical-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.
The oil 132-21 (TU 6-02897-78) is a mix of a polyethilsiloxane liquid and mineral lubricant oils.
It is intended for greasing of bearings in various devices and friction units of the machines working in the range of temperatures -(65-70) … +70°?.
Viscosity kinematic at 100°C, cSt: —
Viscosity kinematic at 20°C, cSt: 45-65
Viscosity kinematic at-50°C, cSt: 5000
Viscosity index, not less: —
Flash temperature in an open crucible, not more low, °C: 170
Hardening temperature, not above, °C:-70
Density at 20°C, kg/m3, no more: 940-970
Acid number, mg, no more: 0.25
Alkaline number, mg, not less: —
The maintenance of silicon, %: 19-24
The maintenance of water, %, no more: 0,005
Data on operational temperatures represent values which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mehaniko-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.
| Scope: Apply to greasing of high-speed and sensitive ball-bearings at temperature from-40 °? to +100 °?, and as for decrease and stabilisation of a friction, anticorrosive protection in ball-bearings, tooth gearings, sliding sites and as for the landing and not protected surfaces of details in the precision devices filled with air and nitrogen. |
The synthetic oil intended for greasing of mechanisms and preparation of plastic greases, and also for use as a dividing liquid. It is efficient in contact to some excited environments in the range of temperatures 50… +50 °?.