Grease PFMS-4S (TU 6.02.917-79) is a polymethylphenylsiloxane fluid solidified with colloid graphite.
The basic operational characteristics: at flow characteristics have it  a intermediate position between greases and pastes. Grease PFMS-4S possess the raised antiscuff properties, high thermal stability and low vaporability. It is efficient at temperature -30°?…+300°?, it is short-term to +400°?.
Scope: aviation friction units, slow-speed bearings of a rolling, screw ball transfers, carvings.

Appearance and colour: Viscous unctuousblack weight
Viscosity effective, ??.?, at 50°?, no more: —
Viscosity effective, ??.?, at-30°C, no more: —
Strength at 20°?, the Pas, not less: —
Drobfall temperature, °?, not more low: —
Colloid stability at loading, %, no more: —
The content of free alkali in recalculation on N???, %, no more: —
Penetration at 25°?, mm, 10-1: —
The content of water, %, no more: Absence
Vaporability at 300°? within 1 hour, %, no more: 16
Reaction of environment (?? a water extract): 6-8

Data on operational temperatures represent values which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mehaniko-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.

The Uniol-2M/1 grease (TU 38.5901243-92) consists of petroleum residual oils, solidified oil complex calcium  soap. Uniol-2M/1 grease contains antioxidizing and antiwear additives. It is hygroscopic, have good colloid, chemical and thermal stability. It is efficient at temperature -40°?…+160°?.
Scope: friction units of the industrial equipment, tunnel furnaces, the hot conveyors, the mountain-extracting equipment, autotractor, agricultural machinery, city electrotransport, ceramic manufacture. Substitutes: Uniol-2, Alyumol.

Appearance and colour: —
Viscosity effective, Pa, at 0°?, no more: 160
Viscosity effective, Pa, at-30°S, no more: —
Strength at 50°?, the Pas, not less: 200-500
Drobfall temperature, °?, not more low: 200
Colloid stability at loading, %, no more: 10
The content of free alkali in recalculation on N???, %, no more: —
Penetration at 0°?, mm, 10-1: 280-320
The content of water, %, no more: —
Vaporability at 150°? within 1 hour, %, no more: —

Data on operational temperatures represent values which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mehaniko-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.

The grease VNIINP-210 (TOR 38.101275-72) is organic silicon liquid, thickened with an indanthrene. It contains graphite, disulfide of molybdenum, an antioxidizing additive.
On properties occupies intermediate position between plastic greases and pastes, it is efficient at residual pressure 666.5 Pas and temperatures from -20 … +250 °?. Application: heavy-duty slow-speed bearings of a rolling and sliding. The substitute products: VNIINP-231, VNIINP-246.
Appearance and color: —
Effective viscosity, Pas, at 0 °?, not more than: 250
Strength at 20 °?, Pas, not less than: 70
Drop temperature, °?, not lower than: —
Colloid stability under load of 300 g, %, not more than: 12
The content of free alkali in recalculation on N???, %, not more than: —
Penetration at 25 °?, mm, 10-1: 390-430
Evaporation at 200 within 5 hours, %, not more than: —
Data on operational temperatures represent values, which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mechanical-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.

The grease VNIINP-231 (GOST 38.1011220-89) is organic silicon liquid thickened with technical carbon (soot) DG-100.
The basic operational characteristics: the grease VNIINP on properties occupies intermediate position between greases and semifluid pastes. Cold resistant. It is efficient at residual pressure 666.5 Pas and temperatures from -60 °?…+250 °?. Application: the closed worm-screw bearings of a rolling and sliding, carving connections.
Appearance and color: Homogeneous ointment of black color
Effective viscosity, Pas, at 50 °?, not more than: 1
Effective viscosity, Pas, at -50 °C, not more than: 400
Strength at 80 °?, Pas, not less than: 150
Drop temperature, °?, not lower than: 180
Colloid stability under load of 300 g, %, not more than: 7.5
The content of free alkali in recalculation on N???, %, not more than: —
Penetration at 25 °?, mm, 10-1: not rated
Evaporation at 200 °?, %, not more than: 5
Data on operational temperatures represent values, which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mechanical-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.

The grease VNIINP-246 (GOST 18852-73) is organic silicon liquid thickened with a pigment. It possesses high thermal stability, low evaporation, good antiscuffing characteristics and frost resistance. It is efficient in vacuum to 1.3·10-4 Pa and at temperatures from -60 °?…250 °?.
Application: bearings of a rolling and low-power tooth gearings. The substitute products: VNIINP-231, VNIINP-235.
Appearance and color: —
Effective viscosity, Pas, at 0 °?, not more than: 60
Effective viscosity, Pas, at -20 °C, not more than: —
Strength at 20 °?, Pas, not less than: 400-600
Drop temperature, °?, not lower than: —
Colloid stability under load of 300 g, %, not more than: 10
The content of free alkali in recalculation on N???, %, not more than: —
Penetration at 25 °?, mm, 10-1: 345-385
Evaporation at 200 °? within 1 hour, %, not more than: —
Mass fraction of free alkali, %, not more than: —
Data on operational temperatures represent values, which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mechanical-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.