Oil IGP-49 (TU 38.101413-97) is a distillate oil, residual oil or a mix of distillate and residual oils from sulphurous petroleums of deep selective clearing with antioxidizing, antiwear, anticorrosive and antifoamy additives.
Apply them basically to greasing of the modern domestic and import equipment in various branches of a national economy for which operation oils with the improved operational properties are necessary.
Oil ИГП-49 serves as a working liquid in hydraulic systems of machine tools, automatic transfer lines, presses. Use for greasing of high-speed transmissions, variators, electromagnetic and gear couplings, bearing units, plain slideways and качения and in other sites and mechanisms where oils with the improved antioxidizing and antiwear properties are required.
The basic indicators characterising operational properties of oils IGP, viscosity, stability against oxidation, anticorrosive properties and firmness to foaming are.

Density at 20°С, kg/m3, no more: 895
Viscosity kinematic, cSt, at 40°С, not less: 76-85
Mass fraction of zinc, %, not less: 0.04
Mass fraction of sulphur, %, not less: 1
Flash temperature, in an open crucible, °C, not more low: 215
Hardening temperature, °C, not above:-15

Data on operational temperatures represent values which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mehaniko-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.

Oil IGP-18 (TOR 38.101413-97) is distillate oil, residual oil or a mix of distillate and residual oils from sulfurous petroleums of deep selective clearing with antioxidizing, wear-protective, anticorrosive and antifoam additives.
The oil is used for greasing of the modern domestic and import equipment in various branches of a national economy for which operation oils with the improved operational properties are necessary.
Oil IGP-18 serves as a working liquid in hydraulic systems of machine tools, automatic transfer lines, presses. Use for greasing of high-speed transmissions, variable-speed transmissions, electromagnetic and gear couplings, sliding and rolling bearings in one sites and in other sites mechanisms where oils with the improved antioxidizing and wear-protective properties are required.
The basic indicators characterizing operational properties of oils IGP are viscosity, stability against oxidation, anticorrosive properties and firmness to foaming.

Density at 20°С, kg/cu.m, not more than: 880
Kinematic viscosity, cSt, at 40°С, not less than: 24-30
Mass fraction of zinc, %, not less than: 0.04
Mass fraction of sulfur, %, not less than: 1
Flash temperature, in an open cup, °C, not lower than: 180
Hardening temperature, °C, not above: -15

Data on operational temperatures represent values, which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mechanical-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect the work of components.

Oil I-20A (GOST 20799-88) is a distillate oil or a mix distillate with residual from sulfurous and low-sulfur petroleums of selective clearing.
It is uses as working liquids in hydraulic systems of the machine-tool equipment, automatic transfer lines, presses. This oil is also used for greasing middle-loaded tooth gearings, slide ways bearing and sliding of machine tools where it is not required to use special oils, and other mechanisms. Mostly the oil I-20А is used in hydraulic systems of the industrial equipment, in building, on the roads and other machines working outdoors.
Application of specified oils in those or other mechanisms depends on their viscosity: in process of its increase in oil use in more loaded and less high-speed mechanisms. It is possible to replace the specified oil with alloyed oils IGP-18, IGP-30, IGP-38 and IGP-49 (TOR 38.101413-97) of corresponding viscosity.
Density at 20 °С, kg/cu.m, not more than: 890
Kinematic viscosity, cSt, at 40 °С, not less than: 25-35
Kinematic viscosity, cSt, at 20 °С, not less than: —
Kinematic viscosity, cSt, at -60 °C, not less than: —
Ash percentage, %, not more than: 0.005
Acid number, potassium hydroxide mg/ g, not more than: 0.03
Flash temperature, in an open cup, °C, not lower than: 180
Hardening temperature, °C, not above: -15
Data on operational temperatures represent values, which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mechanical-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.

Oil VNIINP-403 (GOST 16728-78) is distillate oil from sulphurous and low-sulphur, containing antioxidizing, anticorrosive and antifoamy additives.
Oil VNIINP-403 is intended for application as a working liquid for a volume hydrodrive of metal-cutting machine tools, automatic transfer lines, individual heavy presses and other industrial equipment, and also in circulating lubricant systems of metal-cutting machine tools and other mechanisms working on oil with similar properties.

Density at 20°С, kg/m3, no more: 860-890
Viscosity kinematic, cSt, at 40°С, not less: 41-51
Acid number, mg the GAME/G: 0,7-1,0
Flash temperature, in an open crucible, °C, not more low: 202
Hardening temperature, °C, not above:-20

Data on operational temperatures represent values which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mehaniko-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.

Heavy cylinder oils. Are produced from sulphurous petroleums with application of process of selective clearing. Contain gelled additive.
For the piston steam-engines of different function working with superheated steam: to 3500С