Oil INSp-110 (TU 0253-007-00151911-93) is distilling, residual oil or a mix of distilling and residual oil oils from sulphurous petroleums of the selective clearing, containing anti-«stick-slip», antiscoring additive, adhesive, solubilizationg and antifoamy additives.
Apply for vertical plain slideway and slideway bearing of metal-cutting machine tools, and also horizontal directing with vertical sides of the big area. Besides, it is possible to use for greasing of other knots of machine tools, such, as gear and worm gears, ??????, cams, ratchet mechanisms.

Density at 20°?, kg/m3, no more: 910
Viscosity kinematic, cSt, at 40°?, not less: 175-200
Flash temperature, in an open crucible, °C, not more low: 200
Hardening temperature, °C, not above: -15

Data on operational temperatures represent values which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mehaniko-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can influence work of components.

Oil ILS-10 (TU 38.1011191-97) — distilling oil from sulphurous petroleums of deep selective clearing with antioxidizing, antiwear, anticorrosive and antifoamy additives. Are intended for high-speed spindle unit of metal-cutting machine tools.
Oil ???-10 economically is the most expedient for using instead of oils corresponding on viscosity without additives I-5A and I-8A.

Viscosity kinematic, cSt, at 40°?, not less: 9-11
Mass fraction of zinc, %, not less: 0.04
Mass fraction of sulphur, %, not less: 0.9
Flash temperature, in opened crucible, °C, not more low: 143
Hardening temperature, °C, not above: -15

Data on operational temperatures represent values which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mehaniko-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can influence work of components.

Oil IGP-114 (TU 38.101413-97) is a distillate oil, residual oil or a mix of distillate and residual oils from sulphurous petroleums of deep selective clearing with antioxidizing, antiwear, anticorrosive and antifoamy additives.
Apply them basically to greasing of the modern domestic and import equipment in various branches of a national economy for which operation oils with the improved operational properties are necessary.
Oil IGP-114 use in hydraulic systems heavy ?????????? the equipment and for greasing ????????????? transfers, middlingloaded gear and worm reducers, in circulating systems of grease of the various equipment.
The basic indicators characterising operational properties of oils IGP, viscosity, stability against oxidation, anticorrosive properties and firmness to foaming are.

Viscosity kinematic, cSt, at 40°?, not less: 186-205
Mass fraction of zinc, %, not less: 0.04
Mass fraction of sulphur, %, not less: 1
Flash temperature, in an open crucible, °C, not more low: 230
Hardening temperature, °C, not above:-15

Data on operational temperatures represent values which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mehaniko-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.

Oil IGP-49 (TU 38.101413-97) is a distillate oil, residual oil or a mix of distillate and residual oils from sulphurous petroleums of deep selective clearing with antioxidizing, antiwear, anticorrosive and antifoamy additives.
Apply them basically to greasing of the modern domestic and import equipment in various branches of a national economy for which operation oils with the improved operational properties are necessary.
Oil ???-49 serves as a working liquid in hydraulic systems of machine tools, automatic transfer lines, presses. Use for greasing of high-speed transmissions, variators, electromagnetic and gear couplings, bearing units, plain slideways and ??????? and in other sites and mechanisms where oils with the improved antioxidizing and antiwear properties are required.
The basic indicators characterising operational properties of oils IGP, viscosity, stability against oxidation, anticorrosive properties and firmness to foaming are.

Density at 20°?, kg/m3, no more: 895
Viscosity kinematic, cSt, at 40°?, not less: 76-85
Mass fraction of zinc, %, not less: 0.04
Mass fraction of sulphur, %, not less: 1
Flash temperature, in an open crucible, °C, not more low: 215
Hardening temperature, °C, not above:-15

Data on operational temperatures represent values which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mehaniko-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.

Oil IGP-18 (TOR 38.101413-97) is distillate oil, residual oil or a mix of distillate and residual oils from sulfurous petroleums of deep selective clearing with antioxidizing, wear-protective, anticorrosive and antifoam additives.
The oil is used for greasing of the modern domestic and import equipment in various branches of a national economy for which operation oils with the improved operational properties are necessary.
Oil IGP-18 serves as a working liquid in hydraulic systems of machine tools, automatic transfer lines, presses. Use for greasing of high-speed transmissions, variable-speed transmissions, electromagnetic and gear couplings, sliding and rolling bearings in one sites and in other sites mechanisms where oils with the improved antioxidizing and wear-protective properties are required.
The basic indicators characterizing operational properties of oils IGP are viscosity, stability against oxidation, anticorrosive properties and firmness to foaming.

Density at 20°?, kg/cu.m, not more than: 880
Kinematic viscosity, cSt, at 40°?, not less than: 24-30
Mass fraction of zinc, %, not less than: 0.04
Mass fraction of sulfur, %, not less than: 1
Flash temperature, in an open cup, °C, not lower than: 180
Hardening temperature, °C, not above: -15

Data on operational temperatures represent values, which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mechanical-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect the work of components.