Oil I-20A (GOST 20799-88) is a distillate oil or a mix distillate with residual from sulfurous and low-sulfur petroleums of selective clearing.
It is uses as working liquids in hydraulic systems of the machine-tool equipment, automatic transfer lines, presses. This oil is also used for greasing middle-loaded tooth gearings, slide ways bearing and sliding of machine tools where it is not required to use special oils, and other mechanisms. Mostly the oil I-20? is used in hydraulic systems of the industrial equipment, in building, on the roads and other machines working outdoors.
Application of specified oils in those or other mechanisms depends on their viscosity: in process of its increase in oil use in more loaded and less high-speed mechanisms. It is possible to replace the specified oil with alloyed oils IGP-18, IGP-30, IGP-38 and IGP-49 (TOR 38.101413-97) of corresponding viscosity.
Density at 20 °?, kg/cu.m, not more than: 890
Kinematic viscosity, cSt, at 40 °?, not less than: 25-35
Kinematic viscosity, cSt, at 20 °?, not less than: —
Kinematic viscosity, cSt, at -60 °C, not less than: —
Ash percentage, %, not more than: 0.005
Acid number, potassium hydroxide mg/ g, not more than: 0.03
Flash temperature, in an open cup, °C, not lower than: 180
Hardening temperature, °C, not above: -15
Data on operational temperatures represent values, which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mechanical-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.

Oil VNIINP-403 (GOST 16728-78) is distillate oil from sulphurous and low-sulphur, containing antioxidizing, anticorrosive and antifoamy additives.
Oil VNIINP-403 is intended for application as a working liquid for a volume hydrodrive of metal-cutting machine tools, automatic transfer lines, individual heavy presses and other industrial equipment, and also in circulating lubricant systems of metal-cutting machine tools and other mechanisms working on oil with similar properties.

Density at 20°?, kg/m3, no more: 860-890
Viscosity kinematic, cSt, at 40°?, not less: 41-51
Acid number, mg the GAME/G: 0,7-1,0
Flash temperature, in an open crucible, °C, not more low: 202
Hardening temperature, °C, not above:-20

Data on operational temperatures represent values which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mehaniko-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.

Heavy cylinder oils. Are produced from sulphurous petroleums with application of process of selective clearing. Contain gelled additive.
For the piston steam-engines of different function working with superheated steam: to 3500?

Oil INSp-65 (TOR 0253-007-00151911-93) is distilling, residual oil and a mix of distilling and residual oils from sulfurous petroleums of the selective clearing, containing anti-«stick-slip», extreme pressure additive, adhesive, solubilization and antifoam additives.
The oil is used for greasing guide sliding and slide ways bearings metal-cutting machine tools, transfers of a running screw-nut of machine tools of special high accuracy, with programmed control, heavy and others where uniformity of slow movements is required, accuracy and sensitivity of adjusting movements of tables, supports, sliding boxes, grandmas, racks and other knots and also where it is necessary to lower level of factors of a friction in static and kinetic conditions.
Oil INSp-65 serves for greasing middle- and hard-loaded horizontal directing, and vertical directing or vertical and horizontal directing at the general system of greasing. Except basic purpose it is possible to use the oil INSp for greasing of other knots of machine tools, such, as gear and worm gears, moving sleeves, cams, ratchet mechanisms.

Density at 20 °C, kg/cu.m, not more than: 910
Kinematic viscosity, cSt, at 40 °C, not less than: 100-110
Flash temperature, in an open cup, °C, not lower than: 190
Hardening temperature, °C, not above: -20

Data on operational temperatures represent values, which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mechanical-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can influence work of components.

Oil ILS-5 (TU 38.1011191-97) (in exchange ???-4, ???-6, ???-8, ???-14) — distillate oil from sulphurous petroleums of deep selective clearing with antioxidizing, antiwear, anticorrosive and antifoamy additives.
Are intended for high-speed ??????????? sites of metal-cutting machine tools. Apply to greasing of high-speed mechanisms (spindles, bearings and the connections interfaced to them). Oil ILS-5 economically is the most expedient for using instead of oils corresponding on viscosity without additives — I-5A and I-8A.

Viscosity kinematic, cSt, at 40°?, not less: 4
Mass fraction of zinc, %, not less: 0.04
Mass fraction of sulphur, %, not less: 0.9
Flash temperature, in an open crucible, °C, not more low: 110
Hardening temperature, °C, not above:-15

Data on operational temperatures represent values which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mehaniko-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.