(TOR 38.001347-83)
Oil MGE-46V is prepared on the basis of industrial oils with antioxidizing, wear-protective, depressant and antifoam additives.
Oil MGE-46V is applied as a working liquid to hydro systems of the agricultural and other technics working at pressure to 35 MPa with short-term increase to 42 MPa. MGE-46V it is efficient in a range of temperatures from -10 to 80 °C.

Working liquid NGZH-5u (TU 38.401-58-57-93) is synthetic flame safety, erosion-resistant liquid made on the basis of aethers of phosphoric acid, containing a package of the additives improving вязкостные, antihydrolytic, antioxidizing, anticorrosive and antierosive properties.
Has spontaneous ignition temperature 595-630°C, slowly burns in a flame, does not support burning and does not extend a flame. It is completely compatible to liquids NGZH-4 and NGZH-4u.
Apply in hydrosystems of planes IL-86, IL-96, TU-204, etc. in a range of temperatures from -60 to +150°C at nominal pressure to 21 megapascal.

Colour: violet, dark blue, transparent
Viscosity index, not less: —
Density at 20°C, kg/m3, no more: 1060-1080
Viscosity kinematic, cSt, at 50°C, not less: 8,5
Viscosity kinematic, cSt, at 40°C, not less: —
Viscosity kinematic, cSt, at -60°C, not less: 4200
Acid number, mg, no more: 0.08
Flash temperature, in an open crucible, °C, not more low: 155
Hardening temperature, °C, not above: -65
Turbidity temperature, °C, not above: —

Data on operational temperatures represent values which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mehaniko-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.

Liquid SM-028 use in microcryogenic systems and installations. Represents a high-boiling liquid polyglycol type with an antioxidizing additive. Ignition temperature on the bottom limit — 290 °C, on the top limit — 310 °C. A temperature interval of use of liquid SM-028 -40… +150°C.

The semisynthetic hydraulic liquid — represents a mix polyetilksiloksan liquids and low-viscosity (low cold-test) oil MVP. The specified liquid let out under index VPS. Oil 132-10 is intended for work in hydraulic systems in the range of temperatures from -70 to +100 °C.

Oil AU (TOR 38) is produced from low-sulfur and sulfurous paraffinic petroleums with use of processes of deep selective clearing by phenol and deep dewaxing.
Contains an antioxidizing additive. Ensures functioning of hydro drives from — (30-35) °C to + (90-100) °С.

Density at 20°С, kg/cu.m, not more than: 890
Kinematic viscosity, cSt, at 40 °С, not less than: 16-22
Kinematic viscosity, cSt, at -40 °C, not less than: 1300
Kinematic viscosity, cSt, at 100 °С, not less than: —
Acid number, mg, not more than: 0.05
Flash temperature, in an open cup, °С, not lower than: 165
Hardening temperature, °С, not above:-45
Mass fraction of sulfur, %, not more than: 1
Ash percentage, %, not more than: 0.005

Data on operational temperatures represent values, which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mechanical-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.