Oil VNIINP-403 (GOST 16728-78) is distillate oil from sulphurous and low-sulphur, containing antioxidizing, anticorrosive and antifoamy additives.
Oil VNIINP-403 is intended for application as a working liquid for a volume hydrodrive of metal-cutting machine tools, automatic transfer lines, individual heavy presses and other industrial equipment, and also in circulating lubricant systems of metal-cutting machine tools and other mechanisms working on oil with similar properties.

Density at 20°?, kg/m3, no more: 860-890
Viscosity kinematic, cSt, at 40°?, not less: 41-51
Acid number, mg the GAME/G: 0,7-1,0
Flash temperature, in an open crucible, °C, not more low: 202
Hardening temperature, °C, not above:-20

Data on operational temperatures represent values which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mehaniko-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.

Heavy cylinder oils. Are produced from sulphurous petroleums with application of process of selective clearing. Contain gelled additive.
For the piston steam-engines of different function working with superheated steam: to 3500?

Oil INSp-65 (TOR 0253-007-00151911-93) is distilling, residual oil and a mix of distilling and residual oils from sulfurous petroleums of the selective clearing, containing anti-«stick-slip», extreme pressure additive, adhesive, solubilization and antifoam additives.
The oil is used for greasing guide sliding and slide ways bearings metal-cutting machine tools, transfers of a running screw-nut of machine tools of special high accuracy, with programmed control, heavy and others where uniformity of slow movements is required, accuracy and sensitivity of adjusting movements of tables, supports, sliding boxes, grandmas, racks and other knots and also where it is necessary to lower level of factors of a friction in static and kinetic conditions.
Oil INSp-65 serves for greasing middle- and hard-loaded horizontal directing, and vertical directing or vertical and horizontal directing at the general system of greasing. Except basic purpose it is possible to use the oil INSp for greasing of other knots of machine tools, such, as gear and worm gears, moving sleeves, cams, ratchet mechanisms.

Density at 20 °C, kg/cu.m, not more than: 910
Kinematic viscosity, cSt, at 40 °C, not less than: 100-110
Flash temperature, in an open cup, °C, not lower than: 190
Hardening temperature, °C, not above: -20

Data on operational temperatures represent values, which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mechanical-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can influence work of components.

Oil ILS-5 (TU 38.1011191-97) (in exchange ???-4, ???-6, ???-8, ???-14) — distillate oil from sulphurous petroleums of deep selective clearing with antioxidizing, antiwear, anticorrosive and antifoamy additives.
Are intended for high-speed ??????????? sites of metal-cutting machine tools. Apply to greasing of high-speed mechanisms (spindles, bearings and the connections interfaced to them). Oil ILS-5 economically is the most expedient for using instead of oils corresponding on viscosity without additives — I-5A and I-8A.

Viscosity kinematic, cSt, at 40°?, not less: 4
Mass fraction of zinc, %, not less: 0.04
Mass fraction of sulphur, %, not less: 0.9
Flash temperature, in an open crucible, °C, not more low: 110
Hardening temperature, °C, not above:-15

Data on operational temperatures represent values which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mehaniko-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.

Oil IGP-91 (TOR 38.101413-97) is a distillate oil, residual oil or a mix of distillate and residual oils from sulfurous petroleums of deep selective clearing with antioxidizing, wear-protective, anticorrosive and antifoam additives.
This oil usually is used for greasing of the modern domestic and import equipment in various branches of a national economy for which operation oils with the improved operational properties are necessary.
Oil IGP-91 is used in hydraulic systems of heavy pressure equipment and for greasing gear transfers, middle-loaded gear and worm reducers, in circulating systems of grease of the various equipment.
The basic indicators characterizing operational properties of oils IGP are viscosity, stability against oxidation, anticorrosive properties and firmness to foaming.

Kinematic viscosity, cSt, at 40 °?, not less than: 148-165
Mass fraction of zinc, %, not less than: 0.04
Mass fraction of sulfur, %, not less than: 1
Flash temperature, in an open cup, °C, not lower than: 225
Hardening temperature, °C, not above: -15

Data on operational temperatures represent values, which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mechanical-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.